Transmission system consists of clutch, gear box giving different types of ratios of torque output to applied input. The output torque is then transmitted to gear beam and then to differential beam from which it is transfers to in rear wheel if vehicle is in rear wheel drive. It transmits the required torque according to the vehicle drive. So it is a main part without which we cannot imagine variation of speed and torque.
For checking vehicle it should be placed on level surface and then suspend plumb
line from four different corners. Mark the point on ground. Then check the diagonals of four point marked on ground. It should not be differ by 7 to 8 mm. If difference is more than percribed limit then frame is misaligned.
No comments:
Post a Comment